PVC Strip Door Installation Guide

PVC Strip Door Installation Guide

How to Install:

 

To install Austcold Industries’ PVC Strip Door range, please use the following PVC Strip Door Installation Guide:

 

  1. Remove the packaging from the PVC Strip Door. (Use Caution when using knife not to cut the PVC Strips)
  2. Unroll the rolled up Strip Door and check the mounting style. (for Wall mounting, holes will be located above the PVC Strip fixing on the head section and for Lintel mounting holes will be located on top of the head section)
  3. Once mounting option is confirmed, hold the Aluminium Head Section in its required location and fix the Aluminium Head Section using fasteners and a drill.
  4. Once secure your PVC Strips should finish approximately 10mm off the floor level so that curling and scuffing does not occur.

 

             

 

If you are unsure of how to position the strip door due to the mounting style (Wall mounted or Lintel mounted) please see our Clear PVC Strip Doors page for more information.  

Recent Viewed

Recently Viewed Products

You have not viewed any product yet!
0

Your Cart